Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1600 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1010 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.120 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMDL | FIRST END DIAMETER | 0.6200 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.4990 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SECOND END HAS PARTIAL BORE |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| AAHP | SECOND END STYLE | TWO CROSS DRILLED HOLES |
| ABHP | OVERALL LENGTH | 1.120 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 304 COND A FED SPEC SINGLE MATERIAL RESPONSE |